Larch cladding

Tagged: , ,

This topic contains 1 reply, has 2 voices, and was last updated by  Greg Nelson 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #6352


    Doing some larch cladding on a large project bit of a discussion with the architect about the fixings we want to fix using stainless brads he want to use screws on 60 mm wide boards.

    Ideas how to talk him out of it.



    Greg Nelson

    Paslode pins would be best if the boards aren’t very wide because if you use screws the boards will split.

    Good luck with it.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.